PowerWash Simulator 2 PC requirements, FPS and best settings

Quick answer: can your PC run PowerWash Simulator 2?

Difficulty profile: how hard is PowerWash Simulator 2 to run?

How this game ranks among 937 modelled titles, and how that plays out for entry, mid-range and high-end cards.

Across the 937 games we have modelled, PowerWash Simulator 2 lands on a demand score of 49, ahead of 96% of them. In plain terms it is one of the heaviest games in our data set.

The score is derived from the recommended graphics card in the publisher requirements, Geforce RTX 4060 Ti 8GB, scaled to a 1080p High equivalent. It is a modelling choice rather than a measurement, so read it as a ranking more than a promise.

What it means by card class

• The RTX 5080, standing in for a high-end card, gives roughly 159 FPS at 1080p and 117 FPS at 1440p, with 67 FPS at 4K. Holds roughly 67 FPS at 4K, so resolution is not the limit.
• The RTX 5060, standing in for an entry card, gives roughly 77 FPS at 1080p and 50 FPS at 1440p, with 18 FPS at 4K. Best at 1440p with upscaling: 75 FPS against 50 FPS natively.
• Take an enthusiast card, the RTX 5090: close to 159 FPS at 1080p, 159 FPS at 1440p and 106 FPS at 4K on High. Reaches 106 FPS at 4K on High, so native 4K is realistic.
• The RTX 5070, standing in for a mid-range card, gives roughly 132 FPS at 1080p and 85 FPS at 1440p, with 49 FPS at 4K. Good for 4K only with upscaling on (73 FPS), against 49 FPS natively.

On the CPU side, PowerWash Simulator 2 scores 51, ahead of 98% of the 937 modelled games.

PowerWash Simulator 2 PC requirements: minimum and recommended

The official specs for PowerWash Simulator 2, compared with real graphics cards and processors.

These are the developer figures on Steam, and patches can change them.

Reading the specs against real hardware

At the bottom end, Steam gives GeForce GTX 1060 6GB. That card manages roughly 44 FPS at 1080p on Low according to our estimates, falling to around 24 FPS on High.

Steam suggests Geforce RTX 4060 Ti 8GB as the recommended card, good for close to 66 FPS at 1080p and 43 FPS at 1440p on High here. That is above 60 FPS at 1080p, so the recommended spec reads as a comfortable 1080p target.

The recommended processor, Intel Core i5-13600K, can feed around 102 FPS here according to our estimates, a useful ceiling to compare with your GPU.

Memory is listed as 8 GB RAM at minimum and 16 GB RAM recommended, with 16 GB available space needed on disk.

Best graphics card for PowerWash Simulator 2 by target

From a 30 FPS floor to 4K, here is the card each target asks for in PowerWash Simulator 2.

For 1080p at 60 FPS on High, RTX 4060 is the entry point in our list, with RTX 5060 the first RTX 50 card that clears it.

At 1440p the entry card for 60 FPS on High is the RX 7700 XT, with the RTX 5070 leading the RTX 50 line.

For 4K, upscaling does most of the work: with Quality upscaling the RTX 5070 is the first RTX 50 card to hit 60 FPS on High.

NVIDIA, AMD and Intel cards all appear in the list. Add your own processor, memory and settings in the can my PC run it checker, or see whether your processor limits you in the bottleneck checker.

Estimated PowerWash Simulator 2 FPS on 28 graphics cards

Projected frame rates for 28 graphics cards from NVIDIA, AMD and Intel. Switch resolution below.

Compare the extremes: an RTX 5090 gets close to 159 FPS at 1440p and 106 FPS at 4K, and an RTX 5050 around 37 FPS at 1440p. That is the span of results you can expect in PowerWash Simulator 2.

Full results table

These estimates use the High preset with a fast processor. The two upscaled columns switch on Quality upscaling, which only applies if the game supports it. Results over 360 FPS appear as 360+. For a head-to-head, open the GPU comparison tool.

Card by card verdicts for PowerWash Simulator 2

Twelve popular cards, with a plain-English verdict for each.

Verdicts below use High settings throughout. For older cards a weak result mostly means lowering the preset, since Low and Medium settings recover a lot of speed according to our model.

A useful comparison: RTX 5060 at roughly 50 FPS and RTX 5070 at roughly 85 FPS at 1440p, so the dearer card is close to 71% faster here.

Best PowerWash Simulator 2 settings at 1080p, 1440p and 4K

A 60 FPS plan for each resolution, built from the model and tailored to this game.

1080p playbook

For 1080p play, RTX 4060, RTX 5060 clear 60 FPS on High without any upscaling according to our estimates, which leaves room to raise individual settings.

Pick your card in the table for the preset and upscaling mode that keep 1080p above 60 FPS.

1440p playbook

Native 1440p works on RTX 5070, RTX 5070 Ti, all above 60 FPS on High according to our model. Upscaling then becomes optional rather than required.

Pick your card in the table for the preset and upscaling mode that keep 1440p above 60 FPS.

4K playbook

At 4K, RTX 4080 Super, RTX 5080, RTX 5090 hold 60 FPS natively on High according to our model, so you can leave upscaling off and spend the headroom on settings.

Use the table as a starting point: it shows the highest preset that still reaches 60 FPS for each card at 4K.

Stepping up the RTX 50 range in PowerWash Simulator 2

How much faster each next RTX 50 card is at 1440p using the High preset.

Our model finds the best value step at RTX 5060 Ti 16GB to RTX 5070, close to 43% faster at 1440p, and the weakest at RTX 5070 to RTX 5070 Ti, around 17%.

Prices usually climb faster than performance across the range. In PowerWash Simulator 2 that means the best value often sits in the middle rather than at the top.

Compare options directly in the upgrade value calculator or the GPU price to performance calculator.

PowerWash Simulator 2 VRAM requirements

Estimated graphics memory use using the High preset. Running short causes stutter even on a fast GPU.

The model gives 6 GB at 1080p High, rising to 7.8 GB at 1440p and 10.8 GB at 4K. It is an estimate derived from the recommended graphics card, not a measurement.

Texture settings have the biggest effect on VRAM. In our model Medium textures cut 1440p use from 7.8 GB to close to 6.6 GB.

VRAM size by size

• A 6 GB card is tight at 1080p, short of memory at 1440p and short of memory at 4K on High. Where it is short, Medium textures and upscaling are the practical fixes.
• 8 GB of VRAM reads as comfortable for 1080p, tight for 1440p and short of memory for 4K using the High preset here. Where it is short, Medium textures and upscaling are the practical fixes.
• With 12 GB the verdict is comfortable at 1080p, comfortable at 1440p and tight at 4K on High. Memory is rarely a worry at these settings.
• A 16 GB card is comfortable at 1080p, comfortable at 1440p and comfortable at 4K on High. Memory is rarely a worry at these settings.

Run your own numbers in the VRAM calculator and read how much VRAM you need for gaming.

Which processor do you need for PowerWash Simulator 2?

Which processors keep a fast graphics card busy in this game.

Minimum CPU: Intel Core i3 10100TE (Q2 2020). Recommended: Intel Core i5-13600K. The table converts processor strength into a ceiling on frames per second for PowerWash Simulator 2.

This is a CPU-leaning game by our measure (ahead of 98% of the 937 we model), so do not skimp on the processor when you upgrade the graphics card.

The Core i5-12400F caps at roughly 87 FPS in PowerWash Simulator 2 according to our model. Beyond that frame rate the CPU, not the card, sets the pace.

Check your own CPU and GPU together in the bottleneck checker and the system bottlenecks guide.

Which builds are balanced in PowerWash Simulator 2?

Does the CPU or the GPU set the pace? Seven example builds.

Every build in the table is graphics-limited at 1440p according to our model, so the CPU can stay modest in PowerWash Simulator 2.

If you want neither part to idle, RTX 5090 with Ryzen 7 9800X3D comes closest at 1440p, with a CPU ceiling near 183 FPS and a card good for close to 185 FPS.

None of these is a shopping list. They show how the balance shifts as you move up the range, and the bottleneck checker lets you try your own pair.

How much RAM and storage does PowerWash Simulator 2 need?

What Steam names for memory and disk space, and what it means in practice.

8 GB RAM is the minimum and 16 GB RAM the recommended memory. Once Windows and your usual apps are counted, 16 GB covers it.

The install asks for roughly 16 GB. Downloading it takes around 25 min at 100 Mbps and close to 5 min at 500 Mbps, allowing for overhead.

On drives: Steam does not insist on an SSD, though one will shorten loads.

Work out your total in the RAM calculator, which adds your usual background apps to what the game asks for. Time the download with the download time calculator.

PowerWash Simulator 2 best graphics settings

A starting point for several popular cards. Every cell shows the best preset that still holds 60 FPS.

Each cell shows the highest preset that still reaches 60 FPS in PowerWash Simulator 2, with the upscaling mode it needs.

• Start with upscaling. It gives up little detail for a large frame-rate gain. Take the gentlest mode that manages the frame rate you want.
• Lower the heaviest settings next. If the menu has shadows, fog or draw distance options, those are the usual culprits.
• Leave textures on High if memory allows. The speed cost is small. This game is estimated at 7.8 GB at 1440p.
• Change one thing at a time and note the effect on FPS before moving on.
• Limit the frame rate to your monitor to save power and heat, and the VRR and frame cap calculator suggests a sensible number.

An upscaler is assumed throughout; confirm the game has one in its graphics options. Want a tailored answer? Open the best settings generator, or compare modes in the DLSS and frame generation estimator.

Laptop performance in PowerWash Simulator 2

Modelled laptop results at the power limits laptops usually ship with.

At typical power limits, RTX 5070 Laptop, RTX 5070 Ti Laptop, RTX 5080 Laptop, RTX 5090 Laptop reach 60 FPS at 1080p on High according to our model, and RTX 5080 Laptop, RTX 5090 Laptop also manage 1440p.

Treat laptop numbers cautiously. Wattage, cooling and memory vary between makers, so the same chip can land well below the figures above.

Test other power limits in the laptop TGP estimator.

Genre tips: playing PowerWash Simulator 2 well on PC

General guidance for this kind of game, chosen from the Steam genres and features.

Treat these as rules of thumb for games of this type. They come from the genres on the Steam page, not from testing PowerWash Simulator 2 directly.

• Simulation games usually keep the processor busy, so a strong CPU and plenty of RAM often help more than a bigger graphics card.
• In co-op sessions the frame rate can dip when more players or objects are on screen, so leave some headroom.
• Small teams sometimes skip advanced graphics menus, so resolution scaling and a frame cap may be your best tools.
• Controller support makes living-room play practical, and TVs often cap at 60 or 120 Hz.
• With a light game, a frame cap can save power and heat without any visible change.

PowerWash Simulator 2 screenshots

A look at PowerWash Simulator 2 from the official Steam gallery. Visual detail is what you trade away when you drop presets, so it helps to see what you are keeping.

Screenshots and artwork are promotional images from the PowerWash Simulator 2 Steam store page and belong to FuturLab.

PowerWash Simulator 2 compared with similar games

More PC game guides to compare with.

These guides sit closest to PowerWash Simulator 2 in our data, either because they share genres or because they are about as hard to run. The demand scores use one common scale.

• Two Point Museum: demand score 23 against 49 for PowerWash Simulator 2, so it is lighter on graphics. Shared genres: Casual, Indie, Simulation.
• Car Dealer Simulator sits at 51 for graphics demand and is about as demanding as PowerWash Simulator 2 (49). Shared genres: Casual, Indie, Simulation.
• Librarian: Tidy Up the Arcane Library!: demand score 28 against 49 for PowerWash Simulator 2, so it is lighter on graphics. Shared genres: Casual, Indie, Simulation.
• DrainSim sits at 49 for graphics demand and is about as demanding as PowerWash Simulator 2 (49). Shared genres: Casual, Indie, Simulation.
• shapez 2 - Factory: 27 on our demand scale, lighter than PowerWash Simulator 2. Shared genres: Casual, Indie, Simulation.
• With a demand score of 23, Waterpark Simulator is lighter than PowerWash Simulator 2. Shared genres: Casual, Indie, Simulation.
• Slime Rancher 2: 32 on our demand scale, lighter than PowerWash Simulator 2. Shared genres: Casual, Indie, Simulation.
• Dinkum: 32 on our demand scale, lighter than PowerWash Simulator 2. Shared genres: Casual, Indie, Simulation.

Game facts and Steam reviews for PowerWash Simulator 2

At the time we checked (2026-11-02) Steam showed 7,588 reviews with a Very Positive rating and 92% positive. That is a useful signal for how widely played PowerWash Simulator 2 is.

PowerWash Simulator 2 has been out for close to 13 months, which means drivers and patches are likely still changing its performance. Re-check settings after major updates.

Steam features

Facts come from the public Steam store page. Frame rates here are modelled, since we have not tested the game on every card.

How we estimated PowerWash Simulator 2 performance

A short, honest note on how the numbers are produced.

The inputs for PowerWash Simulator 2 are a graphics demand of 49 (taken from the recommended card), a processor score of 51 (from the listed processor line) and 6 GB of VRAM at 1080p High (estimated from the demand score).

Frame rates scale each graphics card against that demand, then adjust for resolution, preset, upscaling and a memory penalty when a card runs short of VRAM. CPU limits cap the result using a fast reference processor in the GPU tables.

All FPS, VRAM and CPU figures are modelled. They are meant for comparing hardware and settings, and your own testing should have the last word.

PowerWash Simulator 2: your questions answered

The questions players ask most about PowerWash Simulator 2 on PC.

Try PowerWash Simulator 2 in our tools