Whiskerwood PC requirements, FPS and best settings

Can your PC run Whiskerwood? The short answer

How demanding is Whiskerwood?

Where it lands among 937 modelled titles, with a look at what that means for each class of card.

With a demand score of 11, Whiskerwood asks more of a graphics card than 45% of the 937 games in our list. We call that undemanding.

The score is derived from the recommended graphics card in the publisher requirements, NVIDIA® GeForce® GTX 1070 (8 GB) / AMD® Radeon™ RX 5700 (8 GB) / Intel® Arc™ A380 (6 GB), scaled to a 1080p High equivalent. It is a modelling choice rather than a measurement, so read it as a ranking more than a promise.

What it means by card class

• On a mid-range card, the RTX 5070, expect the frame rate to be capped by the game or CPU: roughly 360+ FPS at 1080p, 360+ FPS at 1440p.
• An RTX 5080 (a high-end card) has more power than Whiskerwood can use, landing near 360+ FPS at 1080p and 360+ FPS at 1440p.
• With an entry card such as the RTX 5060 the game is limited by its engine long before the card, with close to 344 FPS at 1080p and 222 FPS at 1440p in our model.
• RTX 5090, our example of an enthusiast card, hits around 360+ FPS at 1080p and 360+ FPS at 1440p, so you will not need to tune much.

Its CPU score is 19, so it asks more of a processor than 18% of the games in our list.

Whiskerwood system requirements

The official specs for Whiskerwood, compared with real graphics cards and processors.

Taken from the Steam store page; developers can revise these with updates.

What the requirements mean in practice

At the bottom end, Steam lists NVIDIA® GeForce® GTX 1050 Ti (4 GB) / AMD® Radeon™ RX-580 (8 GB) / Intel® Arc™ A350 (4 GB). That card manages roughly 107 FPS at 1080p on Low in our estimates, falling to close to 59 FPS on High.

Step up to the recommended NVIDIA® GeForce® GTX 1070 (8 GB) / AMD® Radeon™ RX 5700 (8 GB) / Intel® Arc™ A380 (6 GB) and the model returns roughly 79 FPS at 1080p and 51 FPS at 1440p. That is above 60 FPS at 1080p, so the recommended spec reads as a comfortable 1080p target.

On the CPU side the recommended entry is Intel® Core™ i5-7600 (quad-core) / AMD® Ryzen™ 3 2200G (quad-core), which our model rates at roughly 102 FPS of frame preparation for Whiskerwood.

Steam sets memory at 8 GB RAM minimum, 16 GB RAM recommended, and asks for 10 GB available space of storage.

What graphics card does Whiskerwood need?

Which card hits which target in Whiskerwood, from a 30 FPS floor to 4K.

Our estimates put 1080p 60 FPS on High within reach of the GTX 1060 6GB and above, with the RTX 5050 as the cheapest RTX 50 route there.

Raise the target to 1440p and the bar moves: the GTX 1060 6GB is the lowest card to achieve 60 FPS on High, while the RTX 5050 is the first RTX 50 card to get there.

At 4K, expect to lean on DLSS, FSR or XeSS-style upscaling. The RTX 5050 is the first desktop RTX 50 card to achieve 60 FPS on High once Quality upscaling is switched on.

NVIDIA, AMD and Intel cards all appear in the list. Add your own processor, memory and settings in the can my PC run it checker and check for a processor limit in the bottleneck checker.

Whiskerwood frame rates: 28 cards compared

Estimated frame rates for 28 graphics cards from NVIDIA, AMD and Intel. Use the buttons to change resolution.

In our model the RTX 5090 hits around 360+ FPS at 1440p and 360+ FPS at 4K, while the RTX 5050 manages 165 FPS at 1440p. The spread tells you how much the card matters for Whiskerwood.

Full results table

Every figure assumes High settings and a fast processor. The two upscaled columns switch on Quality upscaling, which only applies if the game supports it. Anything over 360 FPS is capped at 360+ for display. Compare two cards directly in the GPU comparison tool.

Graphics card verdicts: how each one handles Whiskerwood

Twelve popular cards, with a plain-English verdict for each.

Think of the verdict column as a starting point. It judges every card using the High preset, so a modest result can often be improved by dropping one preset or using DLSS, FSR or XeSS-style upscaling.

In this game the RTX 5070 returns around 360+ FPS at 1440p while the RTX 5060 returns 222 FPS, a gap of 71% that is worth weighing against price.

Resolution playbook for Whiskerwood: 1080p, 1440p and 4K

Settings that hold 60 FPS at 1080p, 1440p and 4K, worked out for this game.

1080p playbook

At 1080p, GTX 1660 Super, RTX 3060 12GB, RTX 4060 hold 60 FPS natively on High in our model, so you can leave DLSS, FSR or XeSS-style upscaling off and spend the headroom on settings.

Pick your card in the table for the preset and upscaling mode that keep 1080p above 60 FPS.

1440p playbook

At 1440p, RTX 4060, RTX 5060, RTX 5070 hold 60 FPS natively on High in our model, so you can leave DLSS, FSR or XeSS-style upscaling off and spend the headroom on settings.

Pick your card in the table for the preset and upscaling mode that keep 1440p above 60 FPS.

4K playbook

Native 4K works on RTX 5070 Ti, RTX 4080 Super, RTX 5080, all above 60 FPS on High in our model. Upscaling then becomes optional rather than required.

Pick your card in the table for the preset and upscaling mode that keep 4K above 60 FPS.

Stepping up the RTX 50 range in Whiskerwood

What each step up the RTX 50 range adds at 1440p using the High preset.

The biggest single step in Whiskerwood is RTX 5060 Ti 16GB to RTX 5070, worth close to 43% at 1440p in our model. The smallest is RTX 5070 Ti to RTX 5080 at roughly 0%.

Because Whiskerwood is light on graphics hardware, upgrades beyond the middle of the range mostly raise a number the game or CPU already limits, so a dearer card buys little.

Compare options directly in the upgrade value calculator or the GPU price to performance calculator.

Graphics memory for Whiskerwood: how much is enough?

What the game is likely to want from graphics memory on High. Running short causes stutter even on a fast GPU.

The model gives 3 GB at 1080p High, rising to 3.9 GB at 1440p and 5.4 GB at 4K. It is an estimate derived from the recommended graphics card, not a measurement.

If memory is tight, lower textures first: Medium brings the 1440p figure down to roughly 3.3 GB.

What each memory size means for Whiskerwood

• 6 GB of VRAM reads as comfortable for 1080p, comfortable for 1440p and tight for 4K using the High preset here. Where it is short, Medium textures and DLSS, FSR or XeSS-style upscaling are the practical fixes.
• An 8 GB card is comfortable at 1080p, comfortable at 1440p and comfortable at 4K on High. Where it is short, Medium textures and upscaling are the practical fixes.
• 12 GB of VRAM reads as comfortable for 1080p, comfortable for 1440p and comfortable for 4K using the High preset here. Memory is rarely a worry at these settings.
• With 16 GB the verdict is comfortable at 1080p, comfortable at 1440p and comfortable at 4K on High. Memory is rarely a worry at these settings.

Test other settings in the VRAM calculator and see how much VRAM you need for gaming.

Whiskerwood processor guide

Which processors keep a fast graphics card busy in this game.

The published CPU range runs from Intel® Core™ i5-4670 (quad-core) / AMD® FX-Series™ FX-8350 (quad-core) to Intel® Core™ i5-7600 (quad-core) / AMD® Ryzen™ 3 2200G (quad-core). We turn that into a frame-rate ceiling for nine popular processors in the table.

With a low CPU score, Whiskerwood should run well on older or cheaper processors, leaving the graphics card to set the pace.

The Core i5-12400F caps at roughly 234 FPS in Whiskerwood in our model. Beyond that frame rate the CPU, not the card, sets the pace.

Check your own CPU and GPU together in the bottleneck checker and read system bottlenecks guide.

Which builds are balanced in Whiskerwood?

How seven common processor and graphics card pairs behave in this game.

Look for the Processor label below: 5 of the seven pairings carry it. With RTX 5060 Ti 16GB and Core i5-12400F the chip caps frames near 234 FPS even though the card is good for around 266 FPS.

For balance, look at RTX 4060 with Core i3-12100F. The CPU can prepare around 179 FPS and the card can draw around 190 FPS at 1440p, which is a close match.

These pairings are examples, not recommendations to buy. Swap in your own parts with the bottleneck checker to see which side limits you.

How much RAM and storage does Whiskerwood need?

What The Steam page lists for memory and disk space, and what it means in practice.

For RAM, expect 8 GB RAM at minimum and 16 GB RAM recommended. Allow for the operating system and background apps, which means 16 GB is a sensible floor.

On disk, plan for around 10 GB free. At 100 Mbps with typical overhead that is roughly 16 min to download, or close to 3 min at 500 Mbps.

There is no SSD requirement on the page, but faster storage never hurts.

Add up your own needs in the RAM calculator: it adds Windows, a browser and any streaming to the game's own needs. Estimate the wait with the download time calculator.

Best settings for Whiskerwood

Where to begin for a handful of common cards. Every cell shows the best preset that still holds 60 FPS.

These are our model's best 60 FPS setups for Whiskerwood, ranked by image quality.

• Keep textures high if you have the VRAM. They barely touch frame rate. Our estimate for this game is 3.9 GB at that resolution.
• Change one thing at a time and note the effect on FPS before moving on.
• Limit the frame rate to your monitor to save power and heat, then use the VRR and frame cap calculator to pick the figure.
• Then trim the costliest options. Shadow quality, volumetrics and view distance tend to cost the most when they exist.
• Use upscaling first. It gives up little detail for a large frame-rate gain. Pick the highest quality mode that hits your target.

An upscaler is assumed throughout; confirm the game has one in its graphics options. Get a personal recommendation in the best settings generator, or compare modes in the DLSS and frame generation estimator.

Can a gaming laptop run Whiskerwood?

Estimated FPS on RTX 50 laptop GPUs at typical power limits.

At typical power limits, RTX 5050 Laptop, RTX 5060 Laptop, RTX 5070 Laptop, RTX 5070 Ti Laptop, RTX 5080 Laptop, RTX 5090 Laptop reach 60 FPS at 1080p on High in our model, and RTX 5050 Laptop, RTX 5060 Laptop, RTX 5070 Laptop, RTX 5070 Ti Laptop, RTX 5080 Laptop, RTX 5090 Laptop also manage 1440p.

Treat laptop numbers cautiously. Wattage, cooling and memory vary between makers, so the same chip can land well below the figures above.

Explore different TGP values in the laptop TGP estimator.

What to watch for in Whiskerwood

General guidance for this kind of game, chosen from the Steam genres and features.

These are general tips for undemanding games of this type, not claims about how Whiskerwood itself is built. Use them as a prompt for what to test.

• Strategy titles tend to get heavier the longer a session runs, so judge performance after a few hours rather than at the start.
• Simulation games usually keep the processor busy, so a strong CPU and plenty of RAM often help more than a bigger graphics card.
• Early access builds change often, so performance can shift noticeably between updates. Re-check settings after big patches.

Whiskerwood screenshots

Official screenshots of Whiskerwood follow. They are promotional images, so your own settings and resolution will look different, but they show the art style.

Screenshots and artwork are promotional images from the Whiskerwood Steam store page and belong to Minakata Dynamics and Hooded Horse.

Games similar to Whiskerwood

More PC game guides to compare with.

These guides sit closest to Whiskerwood in our data, either because they share genres or because they are about as hard to run. The demand scores use one common scale.

• With a demand score of 8, Sandustry is about as demanding as Whiskerwood. Shared genres: Simulation, Strategy.
• MineMogul sits at 15 for graphics demand and is heavier than Whiskerwood (11). Shared genres: Simulation, Strategy.
• Rising Front scores 7 on the same scale (Whiskerwood scores 11), which makes it lighter on graphics. Shared genres: Simulation, Strategy.
• Star Birds: demand score 7 against 11 for Whiskerwood, so it is lighter on graphics. Shared genres: Simulation, Strategy.
• Door Kickers 2: Task Force North sits at 4 for graphics demand and is lighter than Whiskerwood (11). Shared genres: Simulation, Strategy.
• Heart of the Machine: demand score 5 against 11 for Whiskerwood, so it is lighter on graphics. Shared genres: Simulation, Strategy.
• With a demand score of 4, Bills Must Be Paid is lighter than Whiskerwood. Shared genres: Simulation, Strategy.
• Cataclismo scores 8 on the same scale (Whiskerwood scores 11), which makes it about as demanding. Shared genres: Simulation, Strategy.

Game facts and Steam reviews for Whiskerwood

On Steam the game sits at Very Positive: 93% positive across 1,889 reviews at the time of checking (2026-11-02). Larger communities tend to share more settings guides and fixes.

The game is out for around 12 months. Updates from Minakata Dynamics and new graphics drivers can both change how it runs, so revisit your settings occasionally.

Steam features

Facts come from the public Steam store page. Frame rates here are modelled, since we have not tested the game on every card.

How the Whiskerwood estimates work

A short, honest note on how the numbers are produced.

Here is what feeds the estimates: demand 11 from the recommended card, CPU score 19 (from the listed processor line), and a 1080p High VRAM figure of 3 GB (estimated from the demand score).

In short: card performance divided by game demand, adjusted for resolution, preset and upscaling, reduced when VRAM is short and capped by processor speed.

Nothing on this page is a measured benchmark. Expect real frame rates to differ with drivers, updates and your own system, and treat the tables as a guide.

Whiskerwood: your questions answered

Quick answers about Whiskerwood requirements, graphics cards, memory and settings.

Free tools to check Whiskerwood on your hardware