Sledders PC requirements, FPS and best settings

Quick answer: can your PC run Sledders?

Where Sledders ranks for hardware demand

Where it lands among 937 modelled titles, and what that means for different classes of graphics card.

We rate the graphics demand of Sledders at 12. That puts it above 48% of the 937 modelled games and firmly in the moderately demanding band.

We take the recommended graphics card The Steam page lists (GTX 1650) and translate it into a 1080p High demand figure. The result ranks games well, but individual frame rates will vary.

What it means by card class

• For a high-end card we use the RTX 5080. It returns close to 253 / 253 / 253 FPS at 1080p, 1440p and 4K on High. Holds roughly 253 FPS at 4K, so resolution is not the limit.
• For an entry card we use the RTX 5060. It returns close to 253 / 203 / 117 FPS at 1080p, 1440p and 4K on High. Holds roughly 117 FPS at 4K, so resolution is not the limit.
• For a mid-range card we use the RTX 5070. It returns close to 253 / 253 / 200 FPS at 1080p, 1440p and 4K on High. Holds roughly 200 FPS at 4K, so resolution is not the limit.
• For an enthusiast card we use the RTX 5090. It returns close to 253 / 253 / 253 FPS at 1080p, 1440p and 4K on High. Comfortable at 4K on High, around 253 FPS before any DLSS, FSR or XeSS-style upscaling.

On the CPU side, Sledders scores 32, ahead of 47% of the 937 modelled games.

Sledders system requirements

The official specs for Sledders, compared with real graphics cards and processors.

Published by the developer on Steam and subject to change with patches.

How the published specs translate to frame rates

Step up to the recommended GTX 1650 and the model returns roughly 81 FPS at 1080p and 52 FPS at 1440p. That is above 60 FPS at 1080p, so the recommended spec reads as a comfortable 1080p target.

Memory is listed as 8 GB RAM at minimum and 8 GB RAM recommended, with 12 GB available space needed on disk.

Which graphics card do you need for Sledders?

From a 30 FPS floor to 4K, here is the card each target asks for in Sledders.

Start at the GTX 1060 6GB if you want 60 FPS at 1080p on High. Among current RTX 50 cards, the RTX 5050 is the first to manage it.

At 1440p the entry card for 60 FPS on High is the GTX 1060 6GB, with the RTX 5050 leading the RTX 50 line.

For 4K, DLSS, FSR or XeSS-style upscaling does most of the work: with Quality upscaling the RTX 5050 is the first RTX 50 card to reach 60 FPS on High.

Cards across NVIDIA, AMD and Intel are included. For a personal answer with your own CPU and RAM, use the can my PC run it checker, or see whether your processor limits you in the bottleneck checker.

Estimated Sledders FPS on 28 graphics cards

Estimated frame rates for 28 graphics cards from NVIDIA, AMD and Intel. Switch resolution below.

Compare the extremes: an RTX 5090 gets close to 253 FPS at 1440p and 253 FPS at 4K, and an RTX 5050 close to 151 FPS at 1440p. That is the span of results you can expect in Sledders.

Full results table

All numbers are for the High preset with a fast processor. Upscaled columns assume the Quality mode of whichever upscaler the game provides. Results over 360 FPS appear as 360+. Compare two cards directly in the GPU comparison tool.

Card by card verdicts for Sledders

A verdict in plain English for twelve popular graphics cards.

Each verdict compares the card with a 60 FPS target on the High preset. Where a card falls short, the usual fix is a lower preset or DLSS, FSR or XeSS-style upscaling, which the settings section prices in.

Between the RTX 5060 (203 FPS at 1440p) and the RTX 5070 (253 FPS) there is roughly a 25% difference in Sledders.

Resolution playbook for Sledders: 1080p, 1440p and 4K

Settings that hold 60 FPS at 1080p, 1440p and 4K, worked out for this game.

1080p playbook

Native 1080p works on GTX 1660 Super, RTX 3060 12GB, RTX 4060, all above 60 FPS on High according to our model. Upscaling then becomes optional rather than required.

Pick your card in the table for the preset and DLSS, FSR or XeSS-style upscaling mode that keep 1080p above 60 FPS.

1440p playbook

1440p is straightforward on RTX 4060, RTX 5060, RTX 5070, which hold 60 FPS on High natively here, so you only need DLSS, FSR or XeSS-style upscaling for extra smoothness.

Pick your card in the table for the preset and DLSS, FSR or XeSS-style upscaling mode that keep 1440p above 60 FPS.

4K playbook

Native 4K works on RTX 5070 Ti, RTX 4080 Super, RTX 5080, all above 60 FPS on High according to our model. Upscaling then becomes optional rather than required.

Each row below is the best-looking combination that still holds 60 FPS at 4K according to our model.

Upgrade path: what a faster card gains in Sledders

How much faster each next RTX 50 card is at 1440p on the High preset.

The biggest single step in Sledders is RTX 5050 to RTX 5060, worth close to 35% at 1440p according to our model. The smallest is RTX 5070 to RTX 5070 Ti at roughly 0%.

Each step costs more than the last, so weigh the percentage against the price. The gain in Sledders usually shrinks as you climb, which is typical of graphics cards.

Compare options directly in the upgrade value calculator or the GPU price to performance calculator.

Graphics memory for Sledders: how much is enough?

Modelled VRAM use at High settings. Falling short of VRAM causes stutter even with a quick GPU.

The model gives 3 GB at 1080p High, rising to 3.9 GB at 1440p and 5.4 GB at 4K. It is an estimate derived from the recommended graphics card, not a measurement.

Dropping texture quality is the quickest way to save memory: stepping from High to Medium trims the estimate to close to 3.3 GB at 1440p.

What each memory size means for Sledders

• With 6 GB the verdict is comfortable at 1080p, comfortable at 1440p and tight at 4K on High. Where it is short, Medium textures and DLSS, FSR or XeSS-style upscaling are the practical fixes.
• An 8 GB card is comfortable at 1080p, comfortable at 1440p and comfortable at 4K on High. Where it is short, Medium textures and DLSS, FSR or XeSS-style upscaling are the practical fixes.
• 12 GB of VRAM reads as comfortable for 1080p, comfortable for 1440p and comfortable for 4K on the High preset here. Memory is rarely a worry at these settings.
• A 16 GB card is comfortable at 1080p, comfortable at 1440p and comfortable at 4K on High. Memory is rarely a worry at these settings.

Run your own numbers in the VRAM calculator and see how much VRAM you need for gaming.

Sledders CPU requirements

How much frame rate each processor can prepare in this game.

Minimum CPU: 2.4 Ghz. Recommended: 3.0 Ghz. The table converts processor strength into a ceiling on frames per second for Sledders.

The CPU load sits in the middle of our range for Sledders, which means a modern mid-range processor will not hold back a typical card.

As a reference, a Core i5-12400F can prepare close to 139 FPS here according to our model. If your graphics card can draw more than that, you will be CPU-limited.

Test your own pairing in the bottleneck checker and our system bottlenecks guide.

Which builds are balanced in Sledders?

How seven common processor and graphics card pairs behave in this game.

Look for the Processor label below: 7 of the seven pairings carry it. With RTX 4060 and Core i3-12100F the chip caps frames near 106 FPS even though the card is good for close to 174 FPS.

For balance, look at RTX 5060 with Ryzen 5 5600. The CPU can prepare around 147 FPS and the card can draw close to 203 FPS at 1440p, which is a close match.

Treat the builds as worked examples. Your own CPU and GPU can be tested together in the bottleneck checker.

Sledders memory and disk space

What Steam lists for memory and disk space, and what it means in practice.

Memory first. Steam sets 8 GB RAM as the minimum and 8 GB RAM as the recommended amount. With Windows, a browser and a chat app open, 16 GB leaves comfortable headroom.

Storage is listed at close to 12 GB. Expect around 19 min to download on a 100 Mbps line, or roughly 4 min on 500 Mbps.

Steam does not state an SSD requirement, so an SSD still improves loading times, but a hard drive should not stop the game launching.

Work out your total in the RAM calculator: it adds Windows, a browser and any streaming to the game's own needs. Estimate the wait with the download time calculator.

Sledders best graphics settings

A starting point for several popular cards. Each cell is the highest preset that still hits 60 FPS.

Read each cell as a recommended starting point for Sledders: the preset first, then the DLSS, FSR or XeSS-style upscaling mode and the estimated result.

• Keep textures high if memory allows. They cost little speed. This game is estimated at 3.9 GB for 1440p.
• Start with DLSS, FSR or XeSS-style upscaling. It costs little image quality and gains many frames. Pick the highest quality mode that hits your target.
• Lower the heaviest settings next. Shadows, volumetric effects and draw distance usually cost the most, if the game offers them.
• Cap your frame rate at your monitor refresh rate to save power and noise, and the VRR and frame cap calculator suggests a sensible number.
• Change one thing at a time and note the effect on FPS before moving on.

These tables assume the game includes an upscaler, so look in its graphics menu. Want a tailored answer? Open the best settings generator, or compare modes in the DLSS and frame generation estimator.

Sledders on gaming laptops

Modelled laptop results at the power limits laptops usually ship with.

Among RTX 50 laptop GPUs, RTX 5050 Laptop, RTX 5060 Laptop, RTX 5070 Laptop, RTX 5070 Ti Laptop, RTX 5080 Laptop, RTX 5090 Laptop clear 60 FPS at 1080p on High at typical wattage, with RTX 5050 Laptop, RTX 5060 Laptop, RTX 5070 Laptop, RTX 5070 Ti Laptop, RTX 5080 Laptop, RTX 5090 Laptop also holding 60 FPS at 1440p.

A laptop GPU is only as fast as the power and cooling its maker allows. Look for the TGP in the spec sheet before relying on any estimate.

Test other power limits in the laptop TGP estimator.

What to watch for in Sledders

General guidance for this kind of game, chosen from the Steam genres and features.

Treat these as rules of thumb for games of this type. They come from the genres on the Steam page, not from testing Sledders directly.

• Racing games can look blurry at low frame rates, so favour a higher frame rate over maximum detail.
• In player-versus-player modes, turn off effects you do not need and cap your frame rate for consistent timing.
• Controller support makes living-room play practical, and TVs often cap at 60 or 120 Hz.
• In co-op sessions the frame rate can dip when more players or objects are on screen, so leave some headroom.
• Sports titles often tie logic to a fixed frame rate, so match your cap to what the game expects.
• Simulation games usually keep the processor busy, so a strong CPU and plenty of RAM often help more than a bigger graphics card.

Sledders screenshots

Below are screenshots supplied for the Steam store page. Compare them with your own game to see how much quality a preset or DLSS, FSR or XeSS-style upscaling mode gives up.

Screenshots and artwork are promotional images from the Sledders Steam store page and belong to Hanki Games and Bonus Stage Publishing.

Games similar to Sledders

Related PC game guides on this site.

Games with a similar profile to Sledders are listed below, chosen by shared genre and closeness of graphics demand. Open one to see how its requirements and FPS compare.

• over the hill: 23 on our demand scale, heavier than Sledders. Shared genres: Racing, Simulation, Sports.
• Sledding Game: demand score 7 against 12 for Sledders, so it is lighter on graphics. Shared genres: Simulation, Sports.
• F1 25 sits at 30 for graphics demand and is heavier than Sledders (12). Shared genres: Racing, Sports.
• Umamusume: Pretty Derby: demand score 4 against 12 for Sledders, so it is lighter on graphics. Shared genres: Simulation, Sports.
• My Garage sits at 23 for graphics demand and is heavier than Sledders (12). Shared genres: Racing, Simulation.
• VOID/BREAKER scores 35 on the same scale (Sledders scores 12), which makes it heavier on graphics. Shared genres: Simulation, Sports.
• My Summer Car scores 23 on the same scale (Sledders scores 12), which makes it heavier on graphics. Shared genres: Racing, Simulation.
• Cairn scores 32 on the same scale (Sledders scores 12), which makes it heavier on graphics. Shared genres: Simulation, Sports.

Game facts and Steam reviews for Sledders

Steam players rate Sledders as Very Positive, with 94% of 2,991 reviews positive when we checked on 2026-11-02. Review scores say little about performance, but a large, positive audience means plenty of community advice on settings.

Being out for close to 20 months, Sledders may still receive performance patches, so keep it updated and keep your graphics drivers current.

Steam features

The facts above are from the public Steam store page. We have not tested the game on every card, so frame rates on this page are modelled estimates.

Method: where the Sledders numbers come from

A short, honest note on how the numbers are produced.

Three numbers drive this page: graphics demand 12 (from the recommended card), CPU score 32 (from an assumed processor line) and VRAM of 3 GB at 1080p High (estimated from the demand score).

Each card is scored against the game demand, then scaled for resolution, quality preset and DLSS, FSR or XeSS-style upscaling. If a card has less VRAM than the game wants, the estimate drops, and a processor ceiling stops frame rates running away.

All FPS, VRAM and CPU figures are modelled. They are meant for comparing hardware and settings, and your own testing should have the last word.

Sledders: your questions answered

Quick answers about Sledders requirements, graphics cards, memory and settings.

Try Sledders in our tools