Master of Command PC requirements, FPS and best settings

Quick answer: can your PC run Master of Command?

Where Master of Command ranks for hardware demand

Where it lands among 937 modelled titles, and what that means for different classes of GPU.

We rate the graphics demand of Master of Command at 7. That puts it above 28% of the 937 modelled games and firmly in the undemanding band.

We take the minimum GPU Steam lists (GeForce GTX 1050) and translate it into a 1080p High demand figure. The result ranks games well, but individual frame rates will vary.

What it means by card class

• An RTX 5060 (an entry card) has more power than Master of Command can use, landing near 360+ FPS at 1080p and 348 FPS at 1440p.
• An RTX 5090 (an enthusiast card) has more power than Master of Command can use, landing near 360+ FPS at 1080p and 360+ FPS at 1440p.
• RTX 5080, our example of a high-end card, delivers close to 360+ FPS at 1080p and 360+ FPS at 1440p, so you will not need to tune much.
• With a mid-range card such as the RTX 5070 the game is limited by its engine long before the card, with about 360+ FPS at 1080p and 360+ FPS at 1440p in our model.

For the processor we score Master of Command at 18, which is above 0% of our data set.

Master of Command system requirements

The official specs for Master of Command, compared with real GPUs and processors.

Taken from the Steam store page; developers can revise these with updates.

How the published specs translate to frame rates

The listed minimum is GeForce GTX 1050. Our model puts it near 140 FPS at 1080p on Low and 77 FPS on High, so treat it as an entry ticket rather than a target.

Steam asks for Intel Core i5-4570 | Ryzen 5 1600 at the recommended level. That class of processor tops out near 90 FPS in Master of Command in our model.

RAM starts at 4 GB RAM and goes to 8 GB RAM for the recommended tier, while the install needs 9 GB available space.

Which graphics card do you need for Master of Command?

The lowest GPU we tested that reaches each target in Master of Command, plus the first desktop RTX 50 card that does.

Our estimates put 1080p 60 FPS on High within reach of the GTX 1060 6GB and above, with the RTX 5050 as the cheapest RTX 50 route there.

For a smooth 1440p on High you want at least the GTX 1060 6GB. Within the RTX 50 range that means the RTX 5050 or above.

Native 4K is a tall order, so assume upscaling. The RTX 5050 is the first RTX 50 card to hit 60 FPS on High that way.

The table covers NVIDIA, AMD and Intel cards. Add your own processor, memory and settings in the can my PC run it checker or look for a CPU bottleneck with the bottleneck checker.

Master of Command frame rates: 28 cards compared

Estimated frame rates for 28 GPUs from NVIDIA, AMD and Intel. Switch resolution below.

In our model the RTX 5090 delivers close to 360+ FPS at 1440p and 360+ FPS at 4K, while the RTX 5050 manages 259 FPS at 1440p. The spread tells you how much the card matters for Master of Command.

Full results table

These estimates use High settings paired with a quick CPU. Upscaled columns assume the Quality mode of whichever upscaler the game provides. Figures above 360 FPS are shown as 360+. Put two cards side by side in the GPU comparison tool.

Card by card verdicts for Master of Command

A verdict in plain English for twelve popular GPUs.

Each verdict compares the card with a 60 FPS target using the High preset. Where a card falls short, the usual fix is a lower preset or upscaling, which the settings section prices in.

The step from an RTX 5060 (348 FPS at 1440p) to an RTX 5070 (360+ FPS) is about 29% in our model, a useful yardstick when choosing between the two.

Best Master of Command settings at 1080p, 1440p and 4K

Settings that hold 60 FPS at 1080p, 1440p and 4K, worked out for this game.

1080p playbook

At 1080p, GTX 1660 Super, RTX 3060 12GB, RTX 4060 hold 60 FPS natively on High in our model, so you can leave upscaling off and spend the headroom on settings.

Start from the preset that still reaches 60 FPS, then raise one setting at a time. The table gives the best preset for each card.

1440p playbook

For 1440p play, RTX 4060, RTX 5060, RTX 5070 clear 60 FPS on High without any upscaling in our estimates, which leaves room to raise individual settings.

Start from the preset that still reaches 60 FPS, then raise one setting at a time. The table gives the best preset for each card.

4K playbook

4K is straightforward on RTX 5070 Ti, RTX 4080 Super, RTX 5080, which hold 60 FPS on High natively here, so you only need upscaling for extra smoothness.

Start from the preset that still reaches 60 FPS, then raise one setting at a time. The table gives the best preset for each card.

Upgrade path: what a faster card gains in Master of Command

The gain from each rung of the RTX 50 ladder at 1440p using the High preset.

Our model finds the best value step at RTX 5050 to RTX 5060, close to 35% faster at 1440p, and the weakest at RTX 5070 to RTX 5070 Ti, about 0%.

Faster cards help less here than in heavier games. Master of Command runs out of graphics work early, so the CPU becomes the limit.

Compare options directly in the upgrade value calculator or the GPU price to performance calculator.

How much VRAM does Master of Command need?

Modelled VRAM use at High settings. Too little VRAM hurts smoothness whatever the GPU speed.

Estimated graphics memory use is 2 GB at 1080p, 2.6 GB at 1440p and 3.6 GB at 4K using the High preset. The figure is an estimate derived from the recommended GPU.

Dropping texture quality is the quickest way to save memory: stepping from High to Medium trims the estimate to close to 2.2 GB at 1440p.

Budget tiers: 6, 8, 12 and 16 GB cards

• With 6 GB the verdict is comfortable at 1080p, comfortable at 1440p and comfortable at 4K on High. Where it is short, Medium textures and upscaling are the practical fixes.
• With 8 GB the verdict is comfortable at 1080p, comfortable at 1440p and comfortable at 4K on High. Where it is short, Medium textures and upscaling are the practical fixes.
• 12 GB of VRAM reads as comfortable for 1080p, comfortable for 1440p and comfortable for 4K using the High preset here. Memory is rarely a worry at these settings.
• With 16 GB the verdict is comfortable at 1080p, comfortable at 1440p and comfortable at 4K on High. Memory is rarely a worry at these settings.

Try your own combination in the VRAM calculator and our guide on how much VRAM you need for gaming.

Master of Command CPU requirements

What a range of popular CPUs can feed a GPU here.

Minimum CPU: Intel i3 series | AMD FX-4000 series. Recommended: Intel Core i5-4570 | Ryzen 5 1600. The table converts processor strength into a ceiling on frames per second for Master of Command.

Processor demand is low here, so a modest CPU is unlikely to be the limit in Master of Command.

A Core i5-12400F tops out near 248 FPS in Master of Command in our estimates, a handy line to compare against your card.

See whether your parts match in the bottleneck checker and read system bottlenecks guide.

Which builds are balanced in Master of Command?

How seven common processor and GPU pairs behave in this game.

Master of Command leaves the processor as the limit in 7 of the seven pairings below. Take the RTX 4060 and Core i3-12100F: the CPU tops out around 189 FPS, below the roughly 299 FPS the card could deliver at 1440p.

For balance, look at RTX 5090 with Ryzen 7 9800X3D. The CPU can prepare around 360+ FPS and the card can draw close to 360+ FPS at 1440p, which is a close match.

Use the table to see how balance changes, then enter your real parts in the bottleneck checker for a personal answer.

How much RAM and storage does Master of Command need?

What Steam gives for memory and disk space, and what it means in practice.

For RAM, expect 4 GB RAM at minimum and 8 GB RAM recommended. Allow for the operating system and background apps, which means 16 GB is a sensible floor.

On disk, plan for close to 9 GB free. At 100 Mbps with typical overhead that is roughly 14 min to download, or about 3 min at 500 Mbps.

On drives: Steam does not insist on an SSD, though one will shorten loads.

Add up your own needs in the RAM calculator, which counts Windows, background apps and streaming on top of the game. Time the download with the download time calculator.

Master of Command best graphics settings

A starting point for several popular cards. Each cell is the highest preset that still reaches 60 FPS.

Each cell shows the highest preset that still reaches 60 FPS in Master of Command, with the upscaling mode it needs.

• Then trim the costliest options. Shadows, volumetric effects and draw distance usually cost the most, if the game offers them.
• Make one change per test and note the effect on FPS before moving on.
• Set a frame cap to your monitor to save power and heat, and check the VRR and frame cap calculator for a sensible figure.
• Start with upscaling. It gives up little detail for a large frame-rate gain. Take the gentlest mode that delivers the frame rate you want.
• Leave textures on High when your card has the memory. The speed cost is small. Our estimate for this game is 2.6 GB for 1440p.

These tables assume the game includes an upscaler, so look in its graphics menu. Get a personal recommendation in the best settings generator, or compare modes in the DLSS and frame generation estimator.

Laptop performance in Master of Command

Estimated FPS on RTX 50 laptop GPUs at typical power limits.

Among RTX 50 laptop GPUs, RTX 5050 Laptop, RTX 5060 Laptop, RTX 5070 Laptop, RTX 5070 Ti Laptop, RTX 5080 Laptop, RTX 5090 Laptop clear 60 FPS at 1080p on High at typical wattage, with RTX 5050 Laptop, RTX 5060 Laptop, RTX 5070 Laptop, RTX 5070 Ti Laptop, RTX 5080 Laptop, RTX 5090 Laptop also holding 60 FPS at 1440p.

A laptop GPU is only as fast as the power and cooling its maker allows. Look for the TGP in the spec sheet before relying on any estimate.

Try different wattages in the laptop TGP estimator.

Tips for a Strategy games like Master of Command

General guidance for this kind of game, chosen from the Steam genres and features.

Steam gives Master of Command under Strategy, so these general tips apply. They are hedged guidance rather than facts about the game's engine.

• Games in this style often lean on the processor and memory as maps, units and simulation grow, so late-game saves can slow down before the GPU is the limit.

Master of Command gallery from Steam

A look at Master of Command from the official Steam gallery. Visual detail is what you trade away when you drop presets, so it helps to see what you are keeping.

Screenshots and artwork are promotional images from the Master of Command Steam store page and belong to Armchair Interactive.

Master of Command compared with similar games

Related PC game guides on this site.

If you are comparing Master of Command with other games, these pages cover titles with a similar hardware appetite or shared genres. Demand scores run on the same scale, so they are directly comparable.

• With a demand score of 8, Cataclismo is about as demanding as Master of Command. Shared genres: Strategy.
• Heart of the Machine: 5 on our demand scale, about as demanding as Master of Command. Shared genres: Strategy.
• Sandustry: 8 on our demand scale, about as demanding as Master of Command. Shared genres: Strategy.
• Door Kickers 2: Task Force North sits at 4 for graphics demand and is about as demanding as Master of Command (7). Shared genres: Strategy.
• Rising Front scores 7 on the same scale (Master of Command scores 7), which makes it about as demanding. Shared genres: Strategy.
• With a demand score of 4, Bills Must Be Paid is about as demanding as Master of Command. Shared genres: Strategy.
• 9 Kings: demand score 4 against 7 for Master of Command, so it is about as demanding. Shared genres: Strategy.
• Star Birds: demand score 7 against 7 for Master of Command, so it is about as demanding. Shared genres: Strategy.

Game facts and Steam reviews for Master of Command

Steam user reviews put Master of Command at Very Positive (93% positive from 2,662 reviews, checked 2026-11-02). It is a measure of popularity and sentiment, not of technical performance.

It was out for close to 13 months when we wrote this guide, so expect patches and driver updates to move the numbers a little over time.

Steam features

Facts come from the public Steam store page. Frame rates here are modelled, since we have not tested the game on every card.

How the Master of Command estimates work

A short, honest note on how the numbers are produced.

Here is what feeds the estimates: demand 7 from the minimum card, CPU score 18 (from the listed processor line), and a 1080p High VRAM figure of 2 GB (estimated from the demand score).

Each card is scored against the game demand, then scaled for resolution, quality preset and upscaling. If a card has less VRAM than the game wants, the estimate drops, and a processor ceiling stops frame rates running away.

Please read the figures as estimates rather than measurements. Drivers, game updates, temperatures and the part of the game you are playing can all move them.

Master of Command: your questions answered

Quick answers about Master of Command requirements, GPUs, memory and settings.

Free tools to check Master of Command on your hardware