Spilled! PC requirements, FPS and best settings

Can your PC run Spilled!? The short answer

Where Spilled! ranks for hardware demand

Where this game sits among 937 modelled titles, with a look at what that means for each class of card.

Across the 937 games we have modelled, Spilled! lands on a demand score of 7, ahead of 28% of them. In plain terms it is a light game for graphics hardware.

The score is derived from the recommended graphics card in the publisher requirements, GTX 1050 / AMD RX 570, scaled to a 1080p High equivalent. It is a modelling choice rather than a measurement, so read it as a ranking more than a promise.

What it means by card class

• With an entry card such as the RTX 5060 the game is limited by its engine long before the card, with around 253 FPS at 1080p and 253 FPS at 1440p in our modelling.
• With an enthusiast card such as the RTX 5090 the game is limited by its engine long before the card, with around 253 FPS at 1080p and 253 FPS at 1440p in our modelling.
• An RTX 5070 (a mid-range card) has more power than Spilled! can use, landing near 253 FPS at 1080p and 253 FPS at 1440p.
• RTX 5080, our example of a high-end card, delivers close to 253 FPS at 1080p and 253 FPS at 1440p, so you will not need to tune much.

Its CPU score is 32, so it asks more of a processor than 47% of the games in our list.

Spilled! PC requirements: minimum and recommended

Official minimum and recommended specs for Spilled!, translated into frame rates.

Taken from the Steam store page; developers can revise these with updates.

How the published specs translate to frame rates

The recommended card, GTX 1050 / AMD RX 570, delivers around 77 FPS at 1080p and 50 FPS at 1440p on High in our modelling. That is above 60 FPS at 1080p, so the recommended spec reads as a comfortable 1080p target.

Memory is listed as 8 GB RAM at minimum and 8 GB RAM recommended, with 1 GB available space needed on disk.

Best graphics card for Spilled! by target

Pick a target and see the card it needs in Spilled!.

The lowest card we tested that holds 60 FPS at 1080p on High is the GTX 1060 6GB, and the first desktop RTX 50 card to do it is the RTX 5050.

For a smooth 1440p on High you want at least the GTX 1060 6GB. Within the RTX 50 range that means the RTX 5050 or above.

Native 4K is a tall order, so assume upscaling. The RTX 5050 is the first RTX 50 card to hit 60 FPS on High that way.

The table covers NVIDIA, AMD and Intel cards. Add your own processor, memory and settings in the can my PC run it checker and check for a processor limit in the bottleneck checker.

Estimated Spilled! FPS on 28 graphics cards

Modelled FPS for 28 graphics cards from NVIDIA, AMD and Intel. Switch resolution below.

Compare the extremes: an RTX 5090 gets close to 253 FPS at 1440p and 253 FPS at 4K, and an RTX 5050 around 253 FPS at 1440p. That is the span of results you can expect in Spilled!.

Full results table

Every figure assumes High settings paired with a quick CPU. Upscaled columns assume the Quality mode of whichever upscaler the game provides. Anything over 360 FPS is capped at 360+ for display. For a head-to-head, open the GPU comparison tool.

Graphics card verdicts: how each one handles Spilled!

A verdict in plain English for twelve popular graphics cards.

Think of the verdict column as a starting point. It judges every card using the High preset, so a modest result can often be improved by dropping one preset or using DLSS, FSR or XeSS-style upscaling.

In this game the RTX 5070 returns close to 253 FPS at 1440p while the RTX 5060 returns 253 FPS, a gap of 0% that is worth weighing against price.

Spilled! settings by resolution

A 60 FPS plan for each resolution, built from the model and tailored to this game.

1080p playbook

Native 1080p works on GTX 1660 Super, RTX 3060 12GB, RTX 4060, all above 60 FPS on High in our modelling. Upscaling then becomes optional rather than required.

Use the table as a starting point: it shows the highest preset that still manages 60 FPS for each card at 1080p.

1440p playbook

Native 1440p works on RTX 4060, RTX 5060, RTX 5070, all above 60 FPS on High in our modelling. Upscaling then becomes optional rather than required.

Pick your card in the table for the preset and upscaling mode that keep 1440p above 60 FPS.

4K playbook

At 4K, RTX 5070 Ti, RTX 4080 Super, RTX 5080 hold 60 FPS natively on High in our modelling, so you can leave DLSS, FSR or XeSS-style upscaling off and spend the headroom on settings.

Pick your card in the table for the preset and upscaling mode that keep 4K above 60 FPS.

Upgrade path: what a faster card gains in Spilled!

What each step up the RTX 50 range adds at 1440p using the High preset.

Our model finds the best value step at RTX 5050 to RTX 5060, close to 0% faster at 1440p, and the weakest at RTX 5050 to RTX 5060, around 0%.

Faster cards help less here than in heavier games. Spilled! runs out of graphics work early, so the CPU becomes the limit.

Compare options directly in the upgrade value calculator or the GPU price to performance calculator.

Graphics memory for Spilled!: how much is enough?

Estimated graphics memory use using the High preset. Running short causes stutter even on a fast GPU.

We put Spilled! at close to 2 GB at 1080p High, 2.6 GB at 1440p and 3.6 GB at 4K. That is an estimate derived from the recommended GPU, so treat it as a guide and leave some memory spare.

Dropping texture quality is the quickest way to save memory: stepping from High to Medium trims the estimate to close to 2.2 GB at 1440p.

Budget tiers: 6, 8, 12 and 16 GB cards

• With 6 GB the verdict is comfortable at 1080p, comfortable at 1440p and comfortable at 4K on High. Where it is short, Medium textures and upscaling are the practical fixes.
• An 8 GB card is comfortable at 1080p, comfortable at 1440p and comfortable at 4K on High. Where it is short, Medium textures and upscaling are the practical fixes.
• A 12 GB card is comfortable at 1080p, comfortable at 1440p and comfortable at 4K on High. Memory is rarely a worry at these settings.
• A 16 GB card is comfortable at 1080p, comfortable at 1440p and comfortable at 4K on High. Memory is rarely a worry at these settings.

Check your own settings in the VRAM calculator and read how much VRAM you need for gaming.

Spilled! CPU requirements

Which processors keep a fast graphics card busy in this game.

The Steam page lists X64 architecture as the minimum processor and X64 architecture as the recommended one. The table shows the most frames each chip can prepare in our modelling, regardless of graphics settings.

With a CPU score of 32, Spilled! is neither light nor heavy on processors. A current mid-range chip is a good fit.

A Core i5-12400F tops out near 139 FPS in Spilled! on our figures, a handy line to compare against your card.

See whether your parts match in the bottleneck checker and our system bottlenecks guide.

Matching a processor to a graphics card for Spilled!

How seven common processor and graphics card pairs behave in this game.

Look for the Processor label below: 7 of the seven pairings carry it. With RTX 4060 and Core i3-12100F the chip caps frames near 106 FPS even though the card is good for close to 299 FPS.

The best-balanced pairing is the RTX 5090 with Ryzen 7 9800X3D: its processor ceiling (close to 291 FPS) sits close to what the card can draw (around 360+ FPS) at 1440p, so neither part is wasted.

Treat the builds as worked examples. Your own CPU and GPU can be tested together in the bottleneck checker.

How much RAM and storage does Spilled! need?

RAM and disk space from the Steam page, with a practical view.

For RAM, expect 8 GB RAM at minimum and 8 GB RAM recommended. Allow for the operating system and background apps, which means 16 GB is a sensible floor.

Storage is listed at close to 1 GB. Expect around 2 min to download on a 100 Mbps line, or roughly 0 min on 500 Mbps.

No SSD requirement is listed, but solid-state storage still helps with load times.

Size your memory with the RAM calculator, which adds your usual background apps to what the game asks for. Estimate the wait with the download time calculator.

Spilled! best graphics settings

Starter settings for six well-known cards. Every cell shows the best preset that still holds 60 FPS.

These are our model's best 60 FPS setups for Spilled!, ranked by image quality.

• Use upscaling first. You lose little sharpness and gain a lot of speed. Take the gentlest mode that delivers the frame rate you want.
• After that, cut the most expensive settings. Shadows, volumetric effects and draw distance usually cost the most, if the game offers them.
• Cap your frame rate to your monitor to save power and heat, then use the VRR and frame cap calculator to pick the figure.
• Make one change per test and compare the result, so you can tell what helped.
• Leave textures on High if you have the VRAM. The speed cost is small. The model puts this game at 2.6 GB for 1440p.

These tables assume the game includes an upscaler, so look in its graphics menu. Want a tailored answer? Open the best settings generator, or compare modes in the DLSS and frame generation estimator.

Spilled! on gaming laptops

What RTX 50 laptop GPUs manage at common wattages.

Among RTX 50 laptop GPUs, RTX 5050 Laptop, RTX 5060 Laptop, RTX 5070 Laptop, RTX 5070 Ti Laptop, RTX 5080 Laptop, RTX 5090 Laptop clear 60 FPS at 1080p on High at typical wattage, with RTX 5050 Laptop, RTX 5060 Laptop, RTX 5070 Laptop, RTX 5070 Ti Laptop, RTX 5080 Laptop, RTX 5090 Laptop also holding 60 FPS at 1440p.

Treat laptop numbers cautiously. Wattage, cooling and memory vary between makers, so the same chip can land well below the figures above.

Try different wattages in the laptop TGP estimator.

Genre tips: playing Spilled! well on PC

General guidance for this kind of game, chosen from the Steam genres and features.

The Steam page lists Spilled! under Adventure, Casual, Indie, so these general tips apply. They are hedged guidance rather than facts about the game's engine.

• Simulation games usually keep the processor busy, so a strong CPU and plenty of RAM often help more than a bigger graphics card.
• Full controller support is listed, so playing from the sofa on a TV is an option, where 60 FPS is usually the sensible target.
• Because the load is light, a frame cap and power-saving settings are worth more than extra graphics options.
• Exploration-heavy adventures tend to hitch when new areas load, which an SSD and spare VRAM can soften.
• Smaller studios sometimes ship settings menus with fewer options, so lowering resolution may be your main tuning tool.

Spilled! screenshots

Official screenshots of Spilled! follow. They are promotional images, so your own settings and resolution will look different, but they show the art style.

Screenshots and artwork are promotional images from the Spilled! Steam store page and belong to Lente.

If you like Spilled!: similar games to check

More PC game guides to compare with.

If you are comparing Spilled! with other games, these pages cover titles with a similar hardware appetite or shared genres. Demand scores run on the same scale, so they are directly comparable.

• Silly Linguine Cat Simulator Deluxe Online: 4 on our demand scale, about as demanding as Spilled!. Shared genres: Adventure, Casual, Indie, Simulation.
• Little Witch in the Woods sits at 4 for graphics demand and is about as demanding as Spilled! (7). Shared genres: Adventure, Casual, Indie, Simulation.
• Keep Driving sits at 4 for graphics demand and is about as demanding as Spilled! (7). Shared genres: Adventure, Casual, Indie, Simulation.
• The Coin Game scores 8 on the same scale (Spilled! scores 7), which makes it about as demanding. Shared genres: Adventure, Casual, Indie, Simulation.
• Wobbly Life: demand score 12 against 7 for Spilled!, so it is heavier on graphics. Shared genres: Adventure, Casual, Indie, Simulation.
• Sledding Game sits at 7 for graphics demand and is about as demanding as Spilled! (7). Shared genres: Adventure, Casual, Indie, Simulation.
• Whisper of the House: 4 on our demand scale, about as demanding as Spilled!. Shared genres: Adventure, Casual, Indie, Simulation.
• Hello Kitty Island Adventure sits at 8 for graphics demand and is about as demanding as Spilled! (7). Shared genres: Adventure, Casual, Indie, Simulation.

Game facts and Steam reviews for Spilled!

At the time we checked (2026-11-02) Steam showed 3,351 reviews with a Very Positive rating and 94% positive. That is a useful signal for how widely played Spilled! is.

Spilled! has been out for close to 20 months, which means drivers and patches are likely still changing its performance. Re-check settings after major updates.

Steam features

Facts come from the public Steam store page. We have not tested the game on every card, so frame rates on this page are modelled estimates.

How the Spilled! estimates work

A short, honest note on how the numbers are produced.

For Spilled! the demand score of 7 comes from the recommended graphics card, the CPU score of 32 from an assumed processor line, and the VRAM figure of 2 GB at 1080p High is estimated from the demand score.

Frame rates scale each graphics card against that demand, then adjust for resolution, preset, DLSS, FSR or XeSS-style upscaling and a memory penalty when a card runs short of VRAM. CPU limits cap the result using a fast reference processor in the GPU tables.

Nothing on this page is a measured benchmark. Expect real frame rates to differ with drivers, updates and your own system, and treat the tables as a guide.

Spilled! FAQ

The questions players ask most about Spilled! on PC.

Try Spilled! in our tools