ReStory: Chill Electronics Repairs PC requirements, FPS and best settings

Quick answer: can your PC run ReStory: Chill Electronics Repairs?

Where ReStory: Chill Electronics Repairs ranks for hardware demand

Where this game sits among 937 modelled titles, and how that plays out for entry, mid-range and high-end cards.

On our demand scale ReStory: Chill Electronics Repairs scores 4. That makes it harder to run than 0% of the 937 games in our data set, which we class as a light game for graphics hardware.

We take the minimum graphics card Steam names (GTX 750ti) and translate it into a 1080p High demand figure. The result ranks games well, but individual frame rates will vary.

What it means by card class

• An RTX 5060 (an entry card) has more power than ReStory: Chill Electronics Repairs can use, landing near 253 FPS at 1080p and 253 FPS at 1440p.
• With a mid-range card such as the RTX 5070 the game is limited by its engine long before the card, with roughly 253 FPS at 1080p and 253 FPS at 1440p in our modelling.
• With a high-end card such as the RTX 5080 the game is limited by its engine long before the card, with roughly 253 FPS at 1080p and 253 FPS at 1440p in our modelling.
• An RTX 5090 (an enthusiast card) has more power than ReStory: Chill Electronics Repairs can use, landing near 253 FPS at 1080p and 253 FPS at 1440p.

Processor demand is rated separately: ReStory: Chill Electronics Repairs scores 32 on our CPU scale, higher than 47% of the games we model.

ReStory: Chill Electronics Repairs PC requirements: minimum and recommended

Official minimum and recommended specs for ReStory: Chill Electronics Repairs, translated into frame rates.

These are the developer figures on Steam, and patches can change them.

What the requirements mean in practice

Steam names GTX 750ti as the minimum graphics card. Expect around 147 FPS at 1080p Low, or around 81 FPS if you raise the preset to High.

There is no recommended spec on the Steam page, which means the demand score for ReStory: Chill Electronics Repairs is anchored to the minimum card. Read the frame rates as a modelled guide.

Steam sets memory at 4 GB RAM minimum, 4 GB RAM recommended, and asks for 1 GB available space of storage.

Which graphics card do you need for ReStory: Chill Electronics Repairs?

From a 30 FPS floor to 4K, here is the card each target asks for in ReStory: Chill Electronics Repairs.

Our estimates put 1080p 60 FPS on High within reach of the GTX 1060 6GB and above, with the RTX 5050 as the cheapest RTX 50 route there.

For a smooth 1440p on High you want at least the GTX 1060 6GB. Within the RTX 50 range that means the RTX 5050 or above.

For 4K, upscaling does most of the work: with Quality DLSS, FSR or XeSS-style upscaling the RTX 5050 is the first RTX 50 card to reach 60 FPS on High.

The table covers NVIDIA, AMD and Intel cards. Add your own processor, memory and settings in the can my PC run it checker or look for a CPU bottleneck with the bottleneck checker.

ReStory: Chill Electronics Repairs frame rates: 28 cards compared

Estimated frame rates for 28 graphics cards from NVIDIA, AMD and Intel. Pick a resolution to redraw the bars.

In our model the RTX 5090 reaches around 253 FPS at 1440p and 253 FPS at 4K, while the RTX 5050 manages 253 FPS at 1440p. The spread tells you how much the card matters for ReStory: Chill Electronics Repairs.

Full results table

Every figure assumes the High preset with a fast processor. Upscaled columns assume the Quality mode of whichever upscaler the game provides. Anything over 360 FPS is capped at 360+ for display. Put two cards side by side in the GPU comparison tool.

Card by card verdicts for ReStory: Chill Electronics Repairs

A verdict in plain English for twelve popular graphics cards.

Each verdict compares the card with a 60 FPS target on the High preset. Where a card falls short, the usual fix is a lower preset or upscaling, which the settings section prices in.

The step from an RTX 5060 (253 FPS at 1440p) to an RTX 5070 (253 FPS) is roughly 0% in our modelling, a useful yardstick when choosing between the two.

Resolution playbook for ReStory: Chill Electronics Repairs: 1080p, 1440p and 4K

A 60 FPS plan for each resolution, built from the model and tailored to this game.

1080p playbook

1080p is straightforward on GTX 1660 Super, RTX 3060 12GB, RTX 4060, which hold 60 FPS on High natively here, so you only need DLSS, FSR or XeSS-style upscaling for extra smoothness.

Each row below is the best-looking combination that still holds 60 FPS at 1080p in our modelling.

1440p playbook

1440p is straightforward on RTX 4060, RTX 5060, RTX 5070, which hold 60 FPS on High natively here, so you only need DLSS, FSR or XeSS-style upscaling for extra smoothness.

Start from the preset that still reaches 60 FPS, then raise one setting at a time. The table gives the best preset for each card.

4K playbook

4K is straightforward on RTX 5070 Ti, RTX 4080 Super, RTX 5080, which hold 60 FPS on High natively here, so you only need DLSS, FSR or XeSS-style upscaling for extra smoothness.

Each row below is the best-looking combination that still holds 60 FPS at 4K in our modelling.

Is a graphics card upgrade worth it for ReStory: Chill Electronics Repairs?

What each step up the RTX 50 range adds at 1440p on the High preset.

Of the six steps up the RTX 50 range, RTX 5050 to RTX 5060 gives the most in ReStory: Chill Electronics Repairs (around 0% at 1440p), while RTX 5050 to RTX 5060 gives the least (roughly 0%).

Faster cards help less here than in heavier games. ReStory: Chill Electronics Repairs runs out of graphics work early, so the CPU becomes the limit.

Compare options directly in the upgrade value calculator or the GPU price to performance calculator.

Graphics memory for ReStory: Chill Electronics Repairs: how much is enough?

What the game is likely to want from graphics memory on High. Too little VRAM hurts smoothness whatever the GPU speed.

The model gives 2 GB at 1080p High, rising to 2.6 GB at 1440p and 3.6 GB at 4K. It is an estimate derived from the recommended graphics card, not a measurement.

Dropping texture quality is the quickest way to save memory: stepping from High to Medium trims the estimate to around 2.2 GB at 1440p.

What each memory size means for ReStory: Chill Electronics Repairs

• With 6 GB the verdict is comfortable at 1080p, comfortable at 1440p and comfortable at 4K on High. Where it is short, Medium textures and DLSS, FSR or XeSS-style upscaling are the practical fixes.
• 8 GB of VRAM reads as comfortable for 1080p, comfortable for 1440p and comfortable for 4K on the High preset here. Where it is short, Medium textures and upscaling are the practical fixes.
• With 12 GB the verdict is comfortable at 1080p, comfortable at 1440p and comfortable at 4K on High. Memory is rarely a worry at these settings.
• With 16 GB the verdict is comfortable at 1080p, comfortable at 1440p and comfortable at 4K on High. Memory is rarely a worry at these settings.

Test other settings in the VRAM calculator and read how much VRAM you need for gaming.

Which processor do you need for ReStory: Chill Electronics Repairs?

What a range of popular CPUs can feed a graphics card here.

Minimum CPU: 2-core / 4-thread CPU. Recommended: 2-core / 4-thread CPU. The table converts processor strength into a ceiling on frames per second for ReStory: Chill Electronics Repairs.

Processor demand is moderate, at 47% of the way up our scale, so any recent six-core chip should cope.

As a reference, a Core i5-12400F can prepare roughly 139 FPS here in our modelling. If your graphics card can draw more than that, you will be CPU-limited.

Check your own CPU and GPU together in the bottleneck checker and the system bottlenecks guide.

CPU and GPU pairings for ReStory: Chill Electronics Repairs

Seven real CPU and GPU combinations, and which part limits each one.

Look for the Processor label below: 7 of the seven pairings carry it. With RTX 4060 and Core i3-12100F the chip caps frames near 106 FPS even though the card is good for around 360+ FPS.

For balance, look at RTX 5090 with Ryzen 7 9800X3D. The CPU can prepare around 291 FPS and the card can draw around 360+ FPS at 1440p, which is a close match.

None of these is a shopping list. They show how the balance shifts as you move up the range, and the bottleneck checker lets you try your own pair.

RAM and storage for ReStory: Chill Electronics Repairs

RAM and disk space from the Steam page, with a practical view.

4 GB RAM is the minimum and 4 GB RAM the recommended memory. Once Windows and your usual apps are counted, 16 GB covers it.

On disk, plan for around 1 GB free. At 100 Mbps with typical overhead that is roughly 2 min to download, or roughly 0 min at 500 Mbps.

On drives: Steam does not insist on an SSD, though one will shorten loads.

Size your memory with the RAM calculator: it adds Windows, a browser and any streaming to the game's own needs. Check how long the install takes with the download time calculator.

ReStory: Chill Electronics Repairs best graphics settings

Starter settings for six well-known cards. Each cell is the highest preset that still reaches 60 FPS.

These are our model's best 60 FPS setups for ReStory: Chill Electronics Repairs, ranked by image quality.

• Cap your frame rate to your monitor to save power and heat, and the VRR and frame cap calculator suggests a sensible number.
• Use DLSS, FSR or XeSS-style upscaling first. You lose little sharpness and gain a lot of speed. Choose the best-looking mode that still hits your target.
• Change one thing at a time and note the effect on FPS before moving on.
• Keep textures high if you have the VRAM. They barely touch frame rate. This game is estimated at 2.6 GB for 1440p.
• After that, cut the most expensive settings. If the menu has shadows, fog or draw distance options, those are the usual culprits.

An upscaler is assumed throughout; confirm the game has one in its graphics options. Get a personal recommendation in the best settings generator, or compare modes in the DLSS and frame generation estimator.

Can a gaming laptop run ReStory: Chill Electronics Repairs?

What RTX 50 laptop GPUs manage at common wattages.

Laptop results: RTX 5050 Laptop, RTX 5060 Laptop, RTX 5070 Laptop, RTX 5070 Ti Laptop, RTX 5080 Laptop, RTX 5090 Laptop reach 60 FPS at 1080p on High at the power limits we assume, and RTX 5050 Laptop, RTX 5060 Laptop, RTX 5070 Laptop, RTX 5070 Ti Laptop, RTX 5080 Laptop, RTX 5090 Laptop can also do 1440p.

Treat laptop numbers cautiously. Wattage, cooling and memory vary between makers, so the same chip can land well below the figures above.

Try different wattages in the laptop TGP estimator.

What to watch for in ReStory: Chill Electronics Repairs

General guidance for this kind of game, chosen from the Steam genres and features.

The Steam page lists ReStory: Chill Electronics Repairs under Indie, Simulation, so these general tips apply. They are hedged guidance rather than facts about the game's engine.

• Large builds, towns or factories can push memory and processor use up over time, so leave some headroom beyond the stated minimum.
• Controller support makes living-room play practical, and TVs often cap at 60 or 120 Hz.
• Smaller studios sometimes ship settings menus with fewer options, so lowering resolution may be your main tuning tool.

ReStory: Chill Electronics Repairs screenshots

These promotional screenshots from the Steam page give a feel for the look you are paying for in graphics terms. Use them to judge how much detail the game shows before you tune your settings.

Screenshots and artwork are promotional images from the ReStory: Chill Electronics Repairs Steam store page and belong to Mandragora and tinyBuild.

If you like ReStory: Chill Electronics Repairs: similar games to check

Related PC game guides on this site.

Games with a similar profile to ReStory: Chill Electronics Repairs are listed below, chosen by shared genre and closeness of graphics demand. Open one to see how its requirements and FPS compare.

• Whisper of the House sits at 4 for graphics demand and is about as demanding as ReStory: Chill Electronics Repairs (4). Shared genres: Indie, Simulation.
• Keep Driving scores 4 on the same scale (ReStory: Chill Electronics Repairs scores 4), which makes it about as demanding. Shared genres: Indie, Simulation.
• Grimshire sits at 4 for graphics demand and is about as demanding as ReStory: Chill Electronics Repairs (4). Shared genres: Indie, Simulation.
• Bills Must Be Paid: demand score 4 against 4 for ReStory: Chill Electronics Repairs, so it is about as demanding. Shared genres: Indie, Simulation.
• Door Kickers 2: Task Force North scores 4 on the same scale (ReStory: Chill Electronics Repairs scores 4), which makes it about as demanding. Shared genres: Indie, Simulation.
• With a demand score of 4, Little Witch in the Woods is about as demanding as ReStory: Chill Electronics Repairs. Shared genres: Indie, Simulation.
• Silly Linguine Cat Simulator Deluxe Online sits at 4 for graphics demand and is about as demanding as ReStory: Chill Electronics Repairs (4). Shared genres: Indie, Simulation.
• With a demand score of 4, Kabuto Park is about as demanding as ReStory: Chill Electronics Repairs. Shared genres: Indie, Simulation.

About ReStory: Chill Electronics Repairs on PC

Steam players rate ReStory: Chill Electronics Repairs as Very Positive, with 94% of 6,058 reviews positive when we checked on 2026-11-02. Review scores say little about performance, but a large, positive audience means plenty of community advice on settings.

It was out for around 3 months when we wrote this guide, so expect patches and driver updates to move the numbers a little over time.

Steam features

Facts come from the public Steam store page. We have not benchmarked every card, so treat the frame rates on this page as estimates from our model.

How the ReStory: Chill Electronics Repairs estimates work

A short, honest note on how the numbers are produced.

The inputs for ReStory: Chill Electronics Repairs are a graphics demand of 4 (taken from the minimum card), a processor score of 32 (from an assumed processor line) and 2 GB of VRAM at 1080p High (estimated from the demand score).

In short: card performance divided by game demand, adjusted for resolution, preset and DLSS, FSR or XeSS-style upscaling, reduced when VRAM is short and capped by processor speed.

All FPS, VRAM and CPU figures are modelled. They are meant for comparing hardware and settings, and your own testing should have the last word.

ReStory: Chill Electronics Repairs FAQ

Short answers to the most common questions about running ReStory: Chill Electronics Repairs on PC.

Free tools to check ReStory: Chill Electronics Repairs on your hardware