FREE TOOL

Refresh rate checker: how many Hz is my monitor?

Find out the refresh rate your screen is really running at. The test times animation frames for three seconds and rounds the result to a standard rate, so you can check that a 144 Hz monitor is not stuck at 60.

Measures in 3 secondsFrame time and late framesDetects 60 to 500 HzRuns in your browser

Run the check

The measurement starts automatically when the page loads. Keep this tab in front while it runs, and press the button to run it again.

Measured refresh rate

Frame pacing test

Measured through the browser, so power saving, background tabs and variable refresh rate can change the reading. Windows settings show the configured rate.

How the refresh rate checker works

Browsers draw animation in step with the display. A page can ask to be called just before each new frame, and the gap between those calls reveals how often the screen refreshes. This checker records the time of each call for three seconds, throws away the first few as warm-up, takes the median gap and converts it to hertz. It then rounds to the nearest standard rate such as 60, 120, 144, 165 or 240.

The median is used rather than the average because a few late frames would otherwise pull the figure down. The result also shows the fastest and slowest gaps and how many frames arrived late, which gives a first hint about smoothness. For a deeper look at that, use the frame pacing test.

Common refresh rates and frame times

The time between frames at each standard refresh rate. The checker compares your measurement with these.

Refresh rateTime per frameTypical use
60 Hz16.67 msOffice screens, many laptops
120 Hz8.33 msPhones, tablets, consoles
144 Hz6.94 msEntry gaming monitors
165 Hz6.06 msGaming monitors
240 Hz4.17 msCompetitive gaming monitors
360 Hz2.78 msEsports monitors

Why the reading may be lower than your monitor

If you own a 144 Hz or 240 Hz monitor and the test reports 60, the display is almost certainly set to a lower mode. Open Windows display settings, choose advanced display, and pick the highest refresh rate. Check that the cable and port support the rate, since older HDMI cables and ports cap at 60 Hz for higher resolutions, and that the monitor menu has any high refresh mode switched on.

Other things lower the reading too. Battery saver can limit drawing. A page that is partly hidden or in a window on a second slower monitor follows that monitor. Some browsers cap animation at 60 Hz in certain modes. The cable bandwidth calculator shows whether your cable can carry the signal you want.

Variable refresh rate and what is normal

With G-SYNC or FreeSync active, the screen refreshes as the game delivers frames, so the measured rate can sit between the minimum and maximum of the range. On a desktop page that is not full screen, the system usually runs at the maximum rate, so readings still match your setting. If the number moves between runs, that is a good sign variable refresh is active.

A measured rate within a few percent of a standard value is normal. A figure far from any standard value suggests throttling or a slow machine. After confirming your rate, make sure the panel can keep up with the response time calculator, and that your graphics card can produce the frames with the monitor and GPU matcher.

How to use the refresh rate checker

  1. Keep this tab in front and close heavy tabs or apps.
  2. Wait three seconds for the first measurement or press Measure refresh rate.
  3. Read the rate and the median frame time.
  4. If it is lower than expected, check the display settings, cable and monitor menu.
  5. Run it again to confirm the change.

Common mistakes to avoid

  • Running the test in a background tab, which slows animation.
  • Testing with battery saver on and blaming the monitor.
  • Assuming the box rate without setting it in the display settings.

Related tools and guides

Keep going with these: Frame pacing and stutter test, Response time vs refresh rate calculator, HDMI and DisplayPort bandwidth calculator, VRR and frame cap calculator, does frame generation add input lag.

Frequently asked questions

How do I check my monitor refresh rate?

Open this page and wait three seconds, or press Measure refresh rate. The tool times animation frames and shows the nearest standard rate. You can also see the configured rate in Windows under display settings and advanced display. Run it twice to be sure.

Why does my 144 Hz monitor show 60 Hz?

Windows is probably set to 60 Hz, or the cable or port cannot carry the higher rate. Choose the highest refresh rate in advanced display settings, use a DisplayPort or certified HDMI cable and switch on any high refresh mode in the monitor menu.

Is this test accurate?

It is accurate to within a few percent for the rate the browser draws at, which is normally your display rate. Power saving, a hidden tab or a slower second screen can change it, so keep the tab in front and run it twice.

What is a good refresh rate for gaming?

Sixty hertz is enough for casual play, 120 to 165 hertz feels noticeably smoother, and 240 hertz or more suits competitive shooters. The benefit only shows if your graphics card can produce frame rates close to the refresh rate. Check your card can reach it first.

Does variable refresh rate change the result?

It can. G-SYNC and FreeSync let the screen follow the frame rate, so the measured value may sit anywhere in the supported range. On the desktop it normally runs at the maximum rate, so the reading often matches your setting.

Independent site. Not affiliated with or endorsed by NVIDIA, AMD or Intel. Product names are trademarks of their owners.