FREE TOOL

Case airflow and fan CFM planner

Good cooling starts with balanced airflow. Enter your fans, their airflow ratings and your filter losses to see whether your case has positive or negative pressure and how quickly it swaps its air.

Intake and exhaust CFMPressure balanceNo sign-upShareable link

Your fans

Dust filters and mesh panels restrict airflow. 15 to 30 percent is common.

Airflow balance

Fan ratings are measured with no restriction. Filters, grilles and radiators lower real airflow, which the loss box models.

Airflow and pressure in a PC case

Every fan in a case moves air, and the total moved in and out decides how the case behaves. If intake fans bring in more air than exhaust fans remove, the case is at positive pressure: the extra air leaves through vents and gaps, which tends to keep dust out when intakes have filters. If exhaust fans move more, the case is at negative pressure: air is drawn in through every gap, which can pull in dust, though it may help hot air leave quickly.

The planner adds up fan airflow in cubic feet per minute, applies the loss from filters and grilles to the intake side and compares the two. Within about 10 percent of each other is treated as balanced.

Typical fan airflow by size

Typical free-air ratings for common fan sizes at medium to high speeds. Check your own fan data sheet.

Fan sizeLow speedHigh speedBest use
92 mm25 to 35 CFM45 to 55 CFMSmall cases
120 mm40 to 55 CFM60 to 80 CFMMost cases
140 mm50 to 70 CFM80 to 110 CFMQuiet, high flow

Why CFM ratings overstate real airflow

Fan makers measure airflow in free air, with nothing in front or behind. Inside a case the fan meets dust filters, mesh panels, radiators, cables and components, all of which restrict flow. A fan with high airflow but low static pressure can lose most of its output behind a dense filter, while a pressure-optimised fan holds up better. That is why the tool includes a loss setting rather than adding raw ratings.

Use the loss box to reflect your own case. A mesh front panel with a thin filter might lose around 15 percent, a solid front panel with side slots more. If you have a radiator in the path, expect a larger loss on that side.

Using balance to improve cooling

Cooling depends on moving heat out of the case, so total airflow matters as well as balance. If temperatures are high, more total airflow generally helps, as long as the air path is sensible: cool air in at the front or bottom, past the graphics card and processor, and warm air out at the rear and top. Check how much heat your system adds with the PC heat output calculator.

The air changes figure shows how often the whole case volume is replaced. Faster is generally cooler. Remember to clean filters regularly, because clogged filters lower airflow more than almost any other factor. Read our power and thermal limits guide for graphics card cooling.

How to use the case airflow planner

  1. Count the fans that pull air into the case and the fans that push it out.
  2. Find each fan's airflow rating in CFM on its specification page.
  3. Estimate how much your filters and grilles restrict intake air.
  4. Enter your case volume in litres from the case specification.
  5. Read the pressure balance and adjust fan counts or speeds to suit.

Common mistakes to avoid

  • Taking CFM ratings at face value. They are measured with no restriction.
  • Ignoring radiators, which reduce airflow a lot.
  • Aiming for extreme pressure. Near balance, slightly positive, is a sensible target.

Related tools and guides

Keep going with these: gaming PC heat output calculator, CPU cooler headroom calculator, PSU wattage calculator, GPU power limit estimator, RTX 5090 power and thermal limits.

Frequently asked questions

Is positive or negative pressure better for a PC case?

Slightly positive pressure with filtered intakes is a common choice because it reduces dust drawn through gaps. Negative pressure can move hot air out quickly but draws in dust. What matters most is total airflow and a sensible air path, so check temperatures under load.

What does CFM mean for a case fan?

CFM stands for cubic feet per minute and measures how much air a fan moves. A higher number means more air, but only with no restriction. Filters, mesh and radiators reduce real airflow, so use the figure as a guide and watch temperatures.

How many fans does a gaming PC case need?

Many cases cool well with two or three intake fans and one or two exhaust fans. The right number depends on the heat your parts produce and the case design. Mesh-fronted cases need fewer fans than closed ones to reach the same temperatures.

Do dust filters hurt airflow?

Yes, a little. A clean fine filter can cut intake airflow by 15 to 30 percent and a clogged one much more. Clean them regularly. Filters are still worth having because dust builds up on heatsinks and lowers cooling over time.

What are air changes per minute?

It shows how many times the air inside the case is replaced each minute at the larger of the intake and exhaust flows. Higher figures mean fresher air passing over parts. It is a rough indicator, because the path the air takes matters too.

Independent site. Not affiliated with or endorsed by NVIDIA, AMD or Intel. Product names are trademarks of their owners.